home *** CD-ROM | disk | FTP | other *** search
- Path: wbmt41.wbmt.tudelft.nl!not-for-mail
- From: "Marcel Offermans" <marcel@wbmt41.wbmt.tudelft.nl>
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A3000t SCSI boot
- Date: Sun, 18 Feb 1996 15:50:10 +0100
- Organization: Private TCP/IP node
- Distribution: world
- Message-ID: <50077759@wbmt41.wbmt.tudelft.nl>
- References: <60.228.4509.0N20B045@canrem.com>
- Reply-To: "M.F.Offermans" <M.F.Offermans@WbMT.TUDelft.NL>
- NNTP-Posting-Host: wb617197.wbmt.tudelft.nl
- X-NewsReader: IntuiNews 1.3a (7.9.95)
-
- Hello Jim,
-
- > I recently added another hard drive to my A3000T. I had a 105 meg
- > Quantum, and a CD-Rom drive. Quantum ID3 was not terminated...CD-Rom ID4
- > was terminated. Everthing worked fine...I decided to add an additional
- > Quantum drive that also wasn't terminated, so I changed the boot drive
- > to ID0...changed the second Quantum to ID3, and plugged it into the SCSI
- > cable between the boot drive, and the CD-Rom...Now it won't boot without
- > a V E R Y long delay...If I have a CD in the CD-Rom drive, it will boot
- > as usual...this wasn't required before... whats up?
-
- I have a three harddisks and a CD-ROM installed in my A3000T. When I added
- the CD-ROM, I initially had the same problem. I solved it by putting the
- CD-ROM on SCSI ID 6, and the harddisks on 5, 4 and 3. It seemed important
- that the CD-ROM had the highest ID. Now the computer boots normally, both
- when there's a CD in the drive (data or audio) and when not.
-
- --
- .---------------------------------------------------------------.
- | \ | Marcel Offermans -- Amiga Developer | \ |
- | \ \ | e-mail: M.F.Offermans@WbMT.TUDelft.NL | \ \ |
- | \ | IRC: Marrs | \ |
- `---------------------------------------------------------------'
-
-